Rep 4.2.1 Developer Motor Assembly - Xerox WorkCentre 7132 Service Documentation

1
Remove the screws (3) and
remove the Waste Auger
Figure 2 Removing the Waste Auger
Reversion 4.0
WorkCentre 7132

REP 4.2.1 Developer Motor Assembly

Parts List on PL 1.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Switch off the power and disconnect the power cord.
2. Remove the Rear Lower Cover, the ESS Cover, and the MCU Cover. (REP 10.2.1)
3. Remove the MCU PWB chassis. (REP 9.1.1)
4. Remove the ESS PWB chassis. (REP 9.2.1)
5. Disconnect the connectors (2). (Figure 1)
2
Disconnect the wire clamp
from the frame
Figure 1 Disconnecting the connectors (2)
6. Remove the Developer Motor Assembly. (Figure 2)
January 2007
4-29
WARNING
1
Disconnect the connec-
tors (2)
Repairs/Adjustments
REP 4.2.1