Rep 10.16 Offset Assembly; Rep 10.17 Offset Motor Assembly - Xerox DocuPrint N2125 Service Manual

REP 10.16 Offset Assembly

Parts List on PL 14.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Offset Catch Tray (REP
2. Remove the Exit Tray Extension (REP
3. Remove the Exit Tray (REP 10.3).
4. Turn the Offset Catch Tray upside down.
5. Remove the Lower Cover (REP 10.5).
6. Hold open the Rear Cover.
7. Remove the Inner Exit Chute Assembly
8. Release the two locking tabs and remove the Offset Lever from the Offset Assembly
ure 1).
9. Remove the two screws that secure the Offset Assembly to the Inner Exit Chute Assembly
(Figure 1).
10. Disconnect P/J229 from the Offset Catch Tray PWB
11. Disconnect P/J226 from the Offset Home Sensor
12. Remove the harness from all harness clamps.
13. Remove the Offset Assembly (Figure
Figure 1 Offset Assembly
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 10.16, REP 10.17
WARNING
10.1).
10.2).
(REP 10.6).
(Figure 1).
(Figure 1).
1).

REP 10.17 Offset Motor Assembly

Parts List on PL 14.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Offset Catch Tray
2. Remove the Exit Tray Extension
3. Remove the Exit Tray (REP
4. Turn the Offset Catch Tray upside down.
5. Remove the Lower Cover
6. Hold open the Rear Cover.
7. Remove the Inner Exit Chute Assembly
(Fig- 8. Remove the Offset Assembly
9. Remove the two screws that secure the Offset Motor
10. Remove the Offset Motor Assembly
Figure 1 Offset Motor Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-76
WARNING
(REP 10.1).
(REP 10.2).
10.3).
(REP 10.5).
(REP 10.6).
(REP 10.16).
(Figure 1).
(Figure 1).
Initial Issue
DocuPrint N2125