Rep 2.1 Mbf Assembly - Xerox DocuPrint N2025 Service Manual

REP 2.1 MBF Assembly

Parts List on PL 4.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Open and extend the MBF Assembly to the paper load position (Figure 1).
3. Remove the screw that secures the cover to the left side of the MBF Assembly (Figure 1).
4. To release the locking tab, push in slightly on the left front of the cover and rotate the cover
clockwise to remove (Figure 1).
5. Release the harness from the underside of the cover (Figure 1).
6. Disconnect the in-line connector P/J121 (Figure 1).
7. Push the MBF into the home position.
8. Push down on the left tray stop, pull out to remove (Figure 2).
9. Push down on the right tray stop, pull out to remove (Figure 3).
10. Extend the MBF Assembly until it stops.
11. Lift the front of the paper handler 1.5 to 2" (38 to 51 mm) and remove the MBF Assembly.
Figure 1 Paper Handler Assembly
Initial Issue
DocuPrint N2025/N2825
WARNING
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-11
Figure 2 Left Tray Stop
Figure 3 Right Tray Stop
Repair-Adjustment
REP 2.1