Rep 4.7 Retard Pad Assembly; Rep 4.8 Mbf No Paper Sensor - Xerox DocuPrint N2125 Service Manual

REP 4.7 Retard Pad Assembly

Parts List on PL 4.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly
4. Remove the Left Front Cover (REP
5. Remove the MBF Chute Assembly
6. Remove the MBF Feed Roll Assembly
7. Open the Bottom Tray Assembly (REP
8. Carefully pry the left and right bracket arms of the Retard Pad Assembly from the MBF
Chute Assembly (Figure 1).
9. Remove the assembly (Figure 1).
Figure 1 Retard Pad Assembly
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
WARNING
(REP 1.1).
(REP 1.6).
1.7).
(REP 4.1).
(REP 4.2).
4.4).

REP 4.8 MBF No Paper Sensor

Parts List on PL 4.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly
4. Remove the Left Front Cover
5. Remove the MBF Chute Assembly
6. Remove the MBF Feed Roll Assembly
7. Open the Bottom Tray Pick Up
8. Remove the MBF Bottom Tray Spring from the two studs on the MBF Chute Assembly
(Figure 1).
9. Release the five hooks that secures the No Paper Sensor and remove
10. Disconnect P/J451 from the No Paper Sensor
Figure 1 Bottom Tray Pick Up
02/2000
4-33
WARNING
(REP 1.1).
(REP 1.6).
(REP 1.7).
(REP 4.1).
(REP 4.2).
(Figure 1).
(Figure 2).
Repair-Adjustment
REP 4.7, REP 4.8
(Figure 2).