Rep 2.6 Tray 1 No Paper Sensor Assembly - Xerox DocuPrint N2025 Service Manual

Figure 2 MBF Tray Assembly
Figure 3 MBF Retard Holder Assembly
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 2.5, REP 2.6

REP 2.6 Tray 1 No Paper Sensor Assembly

Parts List on PL 4.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the MBF Assembly (REP 2.1).
2. Remove the MBF Gear Cover (REP 1.8).
3. Disconnect P/J126 from the sensor assembly (Figure 1).
4. Remove the screw that secures the Tray 1 No Paper Sensor Assembly Bracket to the MBF
(Figure 1).
5. Use a small screwdriver to carefully release the two locking tabs that secure the sensor to
the sensor assembly bracket (Figure 1).
6. Release the sensor harness form the harness clamps and remove the sensor.
Figure 1 Tray 1 No Paper Sensor Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-14
WARNING
DocuPrint N2025/N2825
Initial Issue