Control Panel Troubleshooting; Printer Does Not Come To A "Ready" State; Control Panel Led Is On, Control Panel Display Is Blank - Xerox Phaser 6125 Service Manual
Color laser printer
Hide thumbs
Also See for Phaser 6125:
- User manual (122 pages) ,
- Service manual (62 pages) ,
- Evaluator manual (12 pages)
Table of Contents
Advertisement
Control Panel Troubleshooting
Printer Does Not Come to a "Ready" State
Control Panel LED is On, Control Panel Display is Blank
Phaser 6125/6130 Color Laser Printer Service Manual
1.
Reseat connectors on the Image Processor Board (page 8-60).
2.
Refer to "DC Power Supply Troubleshooting" on page 4-41.
3.
Replace the Control Panel (page 8-13).
4.
Replace the Control Panel wiring harness (page 8-54).
1.
Remove and reseat the Image Processor Board (page 8-60).
2.
Replace the Control Panel (page 8-13).
3.
Replace the Control Panel wiring harness (page 8-54).
4.
Replace the Image Processor Board (page 8-60).
General Troubleshooting
4-37
Advertisement
Table of Contents
Troubleshooting
