Displaying The Device Management Configuration; Remote Switch App Upgrade Configuration Example - H3C S3100 Series Operation Manual

TX power, and RX power. When these parameters are abnormal, you can take corresponding
measures to prevent transceiver faults.
Table 4-10 Display pluggable transceiver information
Operation
Display the current alarm
information of the pluggable
transceiver(s)
Display the currently measured
value of the digital diagnosis
parameters of the anti-spoofing
optical transceiver(s) customized
by H3C

Displaying the Device Management Configuration

After the above configurations, you can execute the display command in any view to display the
operating status of the device management to verify the configuration effects.
Table 4-11 Display the operating status of the device management
Operation
Display the APP to be adopted at next
startup
Display the module type and operating
status of each board
Display CPU usage of a switch
Display memory usage of a switch
Display the operating status of the fan
Display the environment temperature of
the switch
Display the operating status of the power
supply
Display system diagnostic information or
save system diagnostic information to a
file with the extension .diag into the Flash
memory
Display enabled debugging on the switch

Remote Switch APP Upgrade Configuration Example

Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server to the Flash
memory of the switch. Update the switch software by using the device management commands through
CLI.
Command
display transceiver alarm
interface [ interface-type
interface-number ]
display transceiver diagnosis
interface [ interface-type
interface-number ]
Command
display boot-loader [ unit unit-id ]
display device [ manuinfo | unit unit-id ]
display cpu [ unit unit-id ]
display memory [ unit unit-id ]
display fan [ unit unit-id [ fan-id ] ]
display environment
display power [ unit unit-id [ power-id ] ]
display diagnostic-information
display debugging [ unit unit-id ] [ interface
interface-type interface-number ]
[ module-name ]
4-5
Description
Available for all pluggable
transceivers
Available for anti-spoofing
pluggable optical transceiver(s)
customized by H3C only
Description
You can execute
the display
command in any
view.