Displaying The Device Management Configuration; Remote Switch App Upgrade Configuration Example - H3C S3100-52P Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Display the currently
measured value of the
digital diagnosis
parameters of the optical
transceiver(s) customized
by H3C

4.3 Displaying the Device Management Configuration

Display the APP to be
adopted at next startup
Display the module type
and operating status of
each board
Display CPU usage of a
switch
Display the operating status
of the fan
Display memory usage of a
switch
Display the operating status
of the power supply
Display system diagnostic
information or save system
diagnostic information to a
file with the extension .diag
into the Flash memory
Display enabled debugging
on the switch
Display patch state
information

4.4 Remote Switch APP Upgrade Configuration Example

I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch. Update the switch software by using the device
management commands through CLI.
To do...
display transceiver
diagnosis interface
[ interface-type
interface-number ]
To do...
Use the command...
Use the command...
display boot-loader [ unit unit-id ]
display device [ manuinfo [ unit
unit-id ] | unit unit-id ]
display cpu [ unit unit-id ]
display fan [ unit unit-id [ fan-id ] ]
display memory [ unit unit-id ]
display power [ unit unit-id
[ power-id ] ]
display diagnostic-information
display debugging [ unit unit-id ]
[ interface interface-type
interface-number ] [ module-name ]
display patch-information
4-7
Chapter 4 Device Management
Remarks
Available for pluggable
optical transceivers
customized by H3C only
Remarks
Available in
any view.