Poe Profile Configuration Commands - H3C S3100 Series Command Manual

2

PoE Profile Configuration Commands

PoE Profile Configuration Commands
apply poe-profile
Syntax
In system view use the following commands:
apply poe-profile profile-name interface interface-type interface-number [ to interface-type
interface-number ]
undo apply poe-profile profile-name interface interface-type interface-number [ to interface-type
interface-number ]
In Ethernet port view use the following commands:
apply poe-profile profile-name
undo apply poe-profile profile-name
View
System view, Ethernet port view
Parameter
profile-name: Name of a PoE profile, a string of 1 to 15 characters. It starts with a letter from a to z or
from A to Z, and it cannot be any of reserved keywords like all, interface, user, undo, and mode.
interface-type interface-number: Port type and port number. With this argument provided, you can
specify the Ethernet port on which the existing PoE profile configuration is applied in system view.
Description
Use the apply poe-profile command to apply the existing PoE profile configuration to the specified
Ethernet port.
Use the undo apply poe-profile command to cancel the PoE profile configuration for the specified
Ethernet port.
Only one PoE profile can be in use at any time for each Ethernet port.
2-1