Displaying And Maintaining Cluster Management - H3C S5500-EI series Operation Manual

Operation Manual – Cluster Management
H3C S5500-EI Series Ethernet Switches

1.8 Displaying and Maintaining Cluster Management

Display NDP
configuration information
Display the global NTDP
information
Display the device
information collected
through NTDP
Display the detailed
NTDP information of a
specified device
View cluster state and
statistics
View the standard
topology information
View the current blacklist
of the cluster
View the information of
candidate devices
Display the current
topology information or
the topology path
between two devices
Display members in a
cluster
Clear NDP statistics
Note:
Support for the display ntdp single-device mac-address command varies with
devices.
When you display the cluster topology information, the devices attached to the
switch that is listed in the backlist will not be displayed.
To do...
display ndp [ interface interface-list ]
display ntdp
display ntdp device-list [ verbose ]
display ntdp single-device
mac-address mac-address
display cluster
display cluster base-topology
[ mac-address mac-address |
member-id member-number ]
display cluster black-list
display cluster candidates
[ mac-address mac-address |
verbose ]
display cluster current-topology
[ mac-address mac-address
[ to-mac-address mac-address ] |
member-id member-number
[ to-member-id member-number ] ]
display cluster members
[ member-number | verbose ]
reset ndp statistics [ interface
interface-list ]
Chapter 1 Cluster Management Configuration
Use the command...
1-22
Remarks
Available in
any view
Available in
user view