Configuring A Portal Web Server; Configure Basic Parameters For A Portal Web Server - H3C SR8800-F Configuration Manual

Step
4. (Optional.) Set the
destination UDP port
number used by the
device to send unsolicited
portal packets to the
portal authentication
server.
5. (Optional.) Specify the
portal authentication
server type.
6. (Optional.) Set the
interval at which the
device registers with a
portal authentication
server.

Configuring a portal Web server

Configure basic parameters for a portal Web server

Step
1. Enter system view.
2. Create a portal Web server
and enter its view.
3. Specify the VPN instance to
which the portal Web server
belongs.
4. Specify the URL of the portal
Web server.
5. Configure the parameters to
be carried in the URL when
the device redirects it to
users.
6. (Optional.) Specify the portal
Web server type.
Command
port port-number
server-type { cmcc | imc }
server-register [ interval
interval-value ]
Command
system-view
portal web-server server-name
vpn-instance vpn-instance-name
url url-string
url-parameter param-name
{ nas-id | nas-port-id |
original-url | source-address |
source-mac [ encryption { aes |
des } key { cipher | simple }
string ] | value expression }
server-type { cmcc | imc }
303
Remarks
By default, the UDP port
number is 50100.
This port number must be the
same as the listening port
number specified on the portal
authentication server.
By default, the portal
authentication server type is
IMC.
The specified server type must
be the same as the type of the
portal authentication server
actually used.
By default, the device does not
register with a portal
authentication server.
Remarks
N/A
By default, no portal Web servers
exist.
You can create multiple portal
Web servers.
By default, the portal Web server
belongs to the public network.
By default, no URL is specified.
By default, no redirection URL
parameters are configured.
By default, the portal Web server
type is IMC.
The specified server type must be
the same as the type of the portal
Web server actually used.
This command is applicable to
only remote portal authentication.