Tftp-Server - H3C S3100 Series Command Manual

Parameters
cluster: Uploads files through the shared TFTP server of the cluster.
tftp-server: IP address or host name of the TFTP server.
source-file: File name to be uploaded to the shared TFTP server.
destination-file: Name of the file to which the uploaded file will be saved in the storage directory of the
TFTP server.
Description
Use the tftp put command to upload a file from the switch to a specified directory on the TFTP server.
You can use the tftp-server command on the management device to configure the shared TFTP server
of the cluster, which is used for software version update and configuration file backup of the cluster
members. For TFTP server rights and directory configuration, refer to the user guide of the TFTP server
software.
Related commands: tftp get,tftp-server.
You need to specify the cluster keyword completely in the command.
For description of other parameters of the tftp command, refer to the FTP-SFTP-TFTP part of the
manual.
Examples
# Upload file config.cfg on the switch to the shared TFTP server of the cluster and save it as temp.cfg.
<123_1.Sysname> tftp cluster put config.cfg temp.cfg

tftp-server

Syntax
tftp-server ip-address
undo tftp-server
View
Cluster view
Parameters
ip-address: IP address of a TFTP server to be configured for the cluster.
Description
Use the tftp-server command to configure a shared TFTP server for the cluster on the management
device.
Use the undo tftp-server command to remove the shared TFTP server setting.
2-41