Netstream Configuration Examples; Netstream Traditional Data Export Configuration Example - H3C SR6600-X Configuration Manual

NetStream configuration examples

NetStream traditional data export configuration example

Network requirements
As shown in
Router A.
Enable NetStream for incoming traffic on GigabitEthernet 2/0/1 and for outgoing traffic on
•
GigabitEthernet 2/0/2.
Configure the router to export NetStream traditional data to UDP port 5000 of the NetStream
•
server.
Figure 67 Network diagram
Configuration procedure
# Assign an IP address to GigabitEthernet 2/0/1.
<RouterA> system-view
[RouterA] interface gigabitethernet 2/0/1
[RouterA-GigabitEthernet2/0/1] ip address 11.110.2.1 255.255.0.0
# Enable NetStream for incoming traffic on GigabitEthernet 2/0/1.
[RouterA-GigabitEthernet2/0/1] ip netstream inbound
[RouterA-GigabitEthernet2/0/1] quit
# Assign an IP address to GigabitEthernet 2/0/2.
[RouterA] interface gigabitethernet 2/0/2
[RouterA-GigabitEthernet2/0/2] ip address 12.110.2.1 255.255.0.0
# Enable NetStream for outgoing traffic on GigabitEthernet 2/0/2.
[RouterA-GigabitEthernet2/0/2] ip netstream outbound
[RouterA-GigabitEthernet2/0/2] quit
# Specify the export destination host as 12.1 10.2.2 with UDP port 5000.
[RouterA] ip netstream export host 12.110.2.2 5000
Verifying the configuration
# Display NetStream entry information in the cache.
[RouterA] display ip netstream cache
IP NetStream cache information:
Active flow timeout
Inactive flow timeout
Max number of entries
IP active flow entries
MPLS active flow entries
Figure 67, configure NetStream on Router A to collect statistics on packets passing through
: 30 min
: 30 sec
: 1024
: 2
: 0
219