Unpacking And Inspecting The Router; Physical Specifications; Unpacking The Router - H3C CR19000-16 Preparing For Installation

Hide thumbs Also See for CR19000-16:

Table of Contents

Unpacking and inspecting the router

Table1-6 Physical specifications

Model

CR19000-16

NOTE:

The shipping weight of the router includes the chassis and packaging material. You can determine a

moving method for the chassis based on its shipping weight.

WARNING!

To avoid bodily injury, wear protective gloves when unpacking the router.

CAUTION:

• To avoid device damage, move the router to a location close to the installation site before

unpacking it.

• Do not place the carton upside down.

• Use a mechanical lift to move the shipping pallet and keep the router upright during the moving

process.

• If you find the router water-soaked or its surface rusted, stop unpacking it and contact the

equipment supplier.

To unpack the router:

Place the carton flat on the floor with the pallet at the bottom.

Use scissors or diagonal pliers to cut the straps on the carton.

Shipping weight

119.3 kg (263.01 lb)

1-9

Dimensions (H × W × D)

931 × 440 × 857 mm (36.65 × 17.32 × 33.74 in)

Table of Contents