Triumph TR6 PI Operation Manual page 99

88. Fit the oil thrower ensuring that the dished surface
faces away from the crankshaft sprocket.
89. Using a new gasket and jointing compound, fit the
timing chain cover instructions 15 to 18, 12.65.01.
90. Fit the oil pressure relief valve assembly.
91. Fit the oil filter assembly and diPstick.
92. Fit the crankshaft pulley and fan extension,
instructions 10 and II, 12.21.01 .
93. Fit the rocker cover using a new gasket and ensuring
that fib're washers are fitted first and plain washers
under the retaining nuts.
c
CJ
ENGINE.
NT2 423
NOTE: The followmg instructions, 94 to 97, relate to P.l.
engine.
94. Establish the distributor drive shaft end-float -
instructions II to 15, 12.10.22.
95. Turn the crankshaft until number one and six pistons
are at T.D.C. with number one firing.
96. Fit the distributor drive shaft so that the off-set slot
is positioned as illustrated. Ensure however that the
slot at the bottom end of the shaft engages properly
in the oil pump drive dog.
97. Fit the pedestal' compl,ete with the fuel metering
qistributor and time the metering distributor to the
engine - instrwctions 7 to 10, 19.35.01
Continued
Triumph TR6 Manu,d. P.ut No. 545277 Issue 1
NT2 638
12.41.05··