Triumph TR6 PI Operation Manual page 118

ENGINE
TIMING CHAIN AND SPROCKETS
Removing
1. Isolate the battery.
2. Remove the timing chain cover 12.65.14.
3. Remove the oil seal sleeve.
4. Remove the oil thrower.
5. Turn the engine over until numbers one and six
pistons are at T.D.C. number one firing, check that
the timing marks A and B are in evidence and marks
C on the camshaft and crankshaft sprockets line-up.
6.
~traighten
the lock tabs on the camshaft sprocket and
remove the bolts.
7. Remove the timing chain complete with the camshaft
and crankshaft sprockets.
NOTE: Ensure that the crankshaft and camshaft are nut
turned whilst the chain and sprockets are removed.
- Remove and refit
Special tool S341
Timing chain - remove and refit
12.65.12
12.65.14
Nro 420
Refitting
8. Fit the two sprockets in their normal positions on the
camshaft and crankshaft. Check the alignment of the
sprockets by placing a straight edge across the
sprocket.
Continued
12.65.12
12.65.14 Sheet 1 Triumph TR6 Manual. Part No. 545277 Issue I
~
LZJ