Triumph TR6 PI Operation Manual page 388

BODY
4. Reverse instructions I to 3.
Removing
1. Remove the luggage compartment carpet and floor.
2. Remove the luggage compartment lamp 86.45.16.
3.
Remove the eight scrllWS and washers securing the
trim pad to the body. Lift out the trim pad.
Retitting
LUGGAGE COMPARTMENT TRIM PAD
- Remove and refit
REAR COMPARTMENT TRIM PAD
- Remove and refit
76.13.17
76.13.20
NT2S91
The rear compartment trim pad is secured to the
body by eleven screws and cup washers.
AIR INTAKE VENT
- Remove and refit
(Vehicles with hinged vent)
76.15.17
Removing
1. Remove the spring nut and detach the control rod
from the lid.
2. Disconnect both ends of the spring from the lid.
3. Remove the three bolts and lockwashers securing the
lid to the scuttle.
4. Lift off the lid.
Refitting
5. Reverse instructions 1 to 4.
AIR INTAKE VENT
.- Remove and refit
(Vehicles with fixed vent)
76.15.17
The air intake vent is secured to the scuttle by two
screws.
76.13.17
76.15.17
Triumph TR6 Manual. Part No. 545277 Issue t