Triumph TR6 PI Operation Manual page 316

REAR AXLE
FINAL DRIVE UNIT MOUNTINGS
Refitting
5. Refit the two upper front rubber mountings to the
chassis studs.
6. Refit the four nuts, bolts and spring washers securing
the two rear rubber mountings to the rear cover.
7. Refit the hypoid casing to the car 15.25.25.
Removing
1. Remove the hypoid casing from the car 51.25.25.
2. Remove the four nuts, bolts and spring washers
securing the two rear mountings to the rear cover.
3. Remove the rear mountings.
4. Remove the two upper front rubber mountings from
the chassis studs.
- Remove and refit 51.25.31
51.25.31
Triumph TR6 Manual. Part No. 545277 Issue I