Triumph TR6 PI Operation Manual page 170

Removing
I. Remove the rear compartment trim panel 76.13.20.
2. Working from the rear compartment slacken the hose
clip securing the filler hose to the filler cap extension.
3. Withdraw the filler cap complete assembly.
4. Remove the rubber sealing grommet.
Refitting
5. Assemble the rubber sealing grommet to the filler cap
extension.
6. Fit the assemby to the body ensuring that the filler
cap extension locates properly in the filler hose.
7. Secure the hose to the filler cap with the hose clip.
8. Refit the rear compartment trim panel 76.13.20.
FUEL FILLER CAP - P.I.
- Remove and refit
INJECTORS - SET
- Remove and refit
19.55.08
19.60.01
FUEL SYSTEM - PI
.-+-----3
~-~~--4-5
......+-----6
NT2 706
Removing
l. Isolate the battery.
2. Disconnect the fuel pipe at the injector and check
identification of the pipe for reassembly.
Note: The pipes are numbered 1 to 6 starting at the front
of the engine.
Continued
Triumph TR6 Manual. Part No. 545277 Issue 1
19.55.08 P.I.
19.60.01 P.I. Sheet 1