Table of Contents
Advertisement
BRAKES
3-WAY CONNECTOR - FRONT
Removing
1.
Disconnect brake pipe unions (3) and release the
pipes from the connector.
2.
Remove the nut and bolt securing the connector to
the chassis bracket and withdraw the connector.
Refitting
3.
Connect, but do not tighten the brake pipes and
unions (3) to the connector.
4.
Fit the connector to the chassis bracket and secure
with nut'and bolt.
5.
Tighten the pipe unions (3).
6.
Bleed the brakes.
Removing
I.
Jack up the car and remove the rear wheel on the
driver's side of car.
2.
Disconnect the brake pipe union from the flexible
brake hose.
3.
Remove the nut and lockwasher securing the hose to
the trailing arm.
4.
Unscrew the hose from the 3-way connector.
s.
Disconnect the two brake pipe unions from the 3-way
connector.
6.
Remove the nut and bolt securing the connector to
the chassis bracket and withdraw the connector.
Refitting
7.
Reverse instructions 1 to 6. Ensure that the flexible
hose is neither kinked nor twisted on installation.
8.
Fit the rear wheel and remove the jack.
9.
Bleed the brakes.
Removing
1.
Disconnect the electrical plug from the P.D.W.A.
unit.
2.
Disconnect the four brake pipes from the P.D.W.A.
unit.
3.
Remove the bolt and spring washer securing the
P.D.W.A. unit to the car.
4.
Remove the P.D.W.A. unit.
Refitting
5.
Fit the P.D.W.A. unit to the car and secure with bolt
and spring washer.
6.
Fit the four brake pipes to the P.D.W.A. unit.
7.
Connect the electrical plug to the P.D.W.A. unit.
8.
Bleed the brakes.
70.15.33
70.15.36
- Remove and refit
3-WAY CONNECTOR - REAR
- Remove and refit
P.D.W.A. SWITCH
- Remove and refit
70.15.33
70.15.34
70.15.36
NTISOS
[I
~
Triumph TR6 Manual. Pan No. 545277 Issue I
~
..........""9
Hide quick links:
Advertisement
Table of Contents
