Triumph TR6 PI Operation Manual page 393

Refitting
7. Reverse instructions I to 6.
Removing
I. Remove the four screws and washers securing the
lock to the body.
2. Manoeuvre the lockclear of the body.
3. Drill out the two 1/8 in (3'17 mm) rivets securing the
lock catch to the push button mounting plate.
4. Remove the two screws and washers securing the
push button sub assembly to the mounting plate.
5. Extract the circiip and· remove the retainer, spring
and body,
6. Drive out the pin and withdraw the locking device.
LUGGAGE COMPARTMENT LID LOCK
- Remove and refit
LUGGAGE COMPARTMENT LOCK STRIKER
- Remove and refit
76.19.11
76.19.12
BODY
NT2337
Removing
1. Remove the two bolts and washers securing the
striker to the luggage compartment lid.
Refitting
2. Refit in reverse order ensuring correct alignfuent of
the striker and lock.
3. Adjust, if necessary, to achieve positive locking by
unscrewing the locknut and screwing the catch bolt in
or out as required.
4. Retighten the locknut.
~
~
TriumPh TR6 Manual. Pan No.
~4~277
Issue J
76.19.1 I
76.19.12