Triumph TR6 PI Operation Manual page 398

BODY
Refitting
8. Reverse instructions 1 to 7, ensuring that the springs
are in position on the window winder and remote
control handle shafts before refitting the trim pad.
Removing
1. Depress the bezel and press out the pin.
2. Remove the window winder handle and bezel.
3. Depress the bezel and press out the pin.
4. Remove the remote control handle and bezel.
5. Prise out the two buttons.
6. Remove the two screws and washers.
7. Prise off the trim pad - 15 clips.
DOOR TRIM PAD
- Remove and refit 76.34.01
Refitting
6. Reverse instructions I to 5.
;/~
f!
i
i
;-------
i
v--- -- ------ --_
,!
~j
76.37.12
- Remove and refit
DOOR LOCK
Removing
1.
Remove the door trim pad. 76.34.01.
4
2. Loosely refit the regulator handle and fully raise the
glass.
3. Remove the spring clip and washer and detach the
link arm from the lock.
4. Remove the three screws securing the lock.
5. Raise the locking lever and withdraw the lock.
NT 2318
DOOR LOCK STRIKER
- Remove and refit
76.37.23
Removing
1. Remove the three screws and lift off the striker.
Refitting
2. Reverse the above, adjusting if necessary to ensure
correct door closing action.
76.34.01
76.37.23
Triumph TR6 Manual. Pan No. 545277 hsue I