Table of Contents
Advertisement
WINDSCREEN WIPERS AND WASHERS
Refitting
IS.
Fit the rigid tube to the wheelbox spindle.
16.
Right hand side only -
Assemble the wheelbox, short tubing, wheelbox
backplate and two nuts.
17.
Insert the wheelbox through the access aperture.
18.
Position the rubber moulding. Ensure a good seal by
using an approved sealer.
19.
Fit the wheelbox spindle nut.
20.
Left
hand side only -
Position two lengths of tubing to the slots provided
on the wheelbox. Position the wheelbox backplate
and secure with two nuts.
21.
Right hand side only -
Action to prevent losing the short tubing in the
plenum chamber. Slacken two nuts unequally as
shown just enough to push the wheelbox to wheelbox
tubing into position. Tighten two nuts.
22.
Position the access plate. Ensure a good seal by using
an approved sealer. Secure with four screws.
23.
Drivers side only -
Fit the tachometer 88.30.21
24.
Passengers side only -
Fit the demister duct 80.15.03 and the cubby box
76.52.03.
25.
Fit the drivers seat
76~70.04
or the passengers seat
76.70.05 as required.
26.
Fit the air inlet vent 76.15.17.
27.
Perform 84.15.24 operations 20 to 25.
28.
Connect the battery.
/
21
NT 0897
'1
84.15.28 Sheet 2
84.15.29 Sheet 2
Triumph TR6 Manual. Part No. 545277 Issue I
Hide quick links:
Advertisement
Table of Contents
