Triumph TR6 PI Operation Manual page 482

ELECTRICAL
Ft.ASftER UNIT
Refitting
4. Connect the Lucar connectors as detailed on the
appropriate wiring diagram.
5. Fit the flasher unit to the clip.
Removing
I.
Locate the flasher unit mounted in a clip attached to
the left hand front wheelarch closing panel.
2. Pull
the flasher unit from the clip.
3.·, Disconnect the Luear connectors.
Hazard flasher unit - remove
and
refit
Left hand steer vehicles only.
86.55.12
Refitting
4. Reverse instructions 2 to 3. Connect the Lucar
connectors either way round.
Removing
I. Locate the buzzer unit mounted to the lower edge of
the fascia below the tachometer.
2. Remove single screw and spring washer.
3. Disconnect two Lucar connectors.
86.55.13
BUZZER
- Remove
aJid
refit
Later U.S.A. market vehicles only.
Triumph TR6 Manual. Pan No.
S4S277
Issue I
86.55.12
86.55.13