Triumph TR6 PI Operation Manual page 325

STEERING
STEERING COLUMN - UPPER
- Remove and refit
57.40.02
Removing
I. Remove the steering column assembly form the car
57.40.01.
2. Remove the steering wheel 57.60.01.
3. Remove the trafficator clip from the steering column.
4. Remove the tape securing the end cover at the lower
end of the steering column housing and withdraw the
end cover.
5. Slide the steering column downward until obstruction
is felt.
6. Depress the dowls locating the steering column lower
bush to release the bush from its location in the
steering column housing.
7. Withdraw the steering column downward complete
with the lower bush.
8. Remove the lower bush from the column.
Refitting
9. Enter the steering column from the lower end of the
housing.
10. Fit the lower bush to the column (rubber dots on end
face of bush trailing) and align the dowls with the
drillings in the steering column housing.
II. Press the bush into the housing ensuring that the
dowels engage the holes in the column.
12. Fit the end cover and secure with tape.
13. Fit the trafficator clip.
14. Fit the steering column assembly to the car 57.40.01.
15. Fit the steering wheel 57.60.01.
57.40.02
Triumph TR6 Manual. Part No. 545277 Issue 1