Triumph TR6 PI Operation Manual page 206

Removing
1. Remove the radiator 26.40.01.
2. Straighten the lock tabs of the fan securing bolts.
3. Remove the lockplates, four bolts and washers
securing the fan to the crankshaft extension and
withdraw the fan complete with bushes.
Refitting
4. Ensure that the mounting bushes and spacers are
fitted and in sound condition.
5. Offer up the fan to the crankshaft extension and align
the mounting holes. Note that the recessed faces of
the fan hub must be fitted
~djacent
to the radiator.
6. Fit the four securing bolts and washers. Evenly
tighten the bolts and bend over lock tabs.
7. Fit the radiator 26.40.01
FAN (Carburetter engines)
- Remove and refit
FAN (P.I. Engines)
- Remove and refit
26.25.06
26.25.06
COOLING SYSTEM
Removing
1. Remove the radiator 26.40.01.
2a. To remove the fan only remove the outer four bolts
and washers securing the fan to the fan adaptor, and
withdraw the fan.
2b. To remove fan and adaptor remove the inner four
bolts and washers securing the fan adaptor to the
crankshaft extension.
Refitting
Fan only
3a. Offer up the fan to the adaptor ensuring that the face
marked FRONT is fitted adjacent to the radiator.
4a. Align the mounting holes and fit the four securing
bolts and washers. Evenly tighten the bolts.
Sa. Fit the radiator 26.40.01. and refill the cooling
sy~tem.
Fan complete with adaptor
3b. Offer up the fan and adaptor to the crankshaft
extension and align the mounting holes.
4b. Fit the four securing bolts and washers. Evenly
tighten the bolts.
5b. Fit the radiator 26.40.01 and refill the cooling system.
Triumph TR6 Manua:l. Part No. 545277 Issue I
26.25.06
26.25.06