Table of Contents
Advertisement
Refitting
7.
Reverse instructions 1 to 6. Connect the Lucar
connectors either way round.
Removing
1.
Open the luggage boot lid.
2.
Remove two screws.
3.
Withdraw the lamp assembly from the petrol tank
trim panel.
4.
Disconnect two Lucar connectors.
5.
Remove the elastic band and separate the two
components of the lamp.
6.
Carefully lever out the festoon bulb.
LAMPS
Luggage boot lamp - remove and refit
86.45.16.
ELECTRICAL
NTOdJ
LAMPS
- Transmission tunnel lamp - remove and refit
86.45.20
Removing
1.
Remove two screws and lift off the cover/lens
assembly.
2.
To renew the festoon bulb, carefully lever the bulb
from the contacts.
3.
Remove two screws and lift off the lamp base
assembly.
4.
Remove two screws on the left hand side of the
plinth. Lift the plinth slightly to locate and free the
harness.
5.
Disconnect three snap connectors.
Refitting
6.
Reverse instructions 1 to 5.
Triumph TR6 Manual. Part No. 545277 Issue 1
86.45'.16
86.45.20
Hide quick links:
Advertisement
Table of Contents
