Triumph TR6 PI Operation Manual page 214

MANIFOLD AND EXHAUST SYSTEM
FRONT PIPES
- Remove and refit
30.10.09
Removing
1. Remove the front intermediate pipes
30.10.11/30.10.12.
2. Remove the four nuts and lockwashers securing the
front pipes to the manifold.
3. Remove the front pipes.
Refitting
4. Refit the front intermediate pipes but do not fully
tighten the clips.
5. Slide the front pipes into the intermediate pipes
sufficiently to ensure gas proof joints.
6. Fit the new flange packing.
7. Align the front pipes over the manifulJ studs and
replace and tighten the nuts and lockwashers.
8. Tighten all clips, and fixings.
INTERMEDIATE PIPES - FRONT
- Remove.and refit - L.H.
-R.H.
Removing
30.10.11
30.10.12
1.
2.
3.
4.
5.
Slacken the two clips securing the front intermediate
pipes to the rear intermediate pipes.
Slacken the two clips securing tile front pipes to the
front intermediate pipes.
Remove the nut, bolt and lockwasher securing the
front intermediate pipes to the mounting bracket.
Disengage the rear intermediate pipes from the front
intermediate pipes.
Remove the front intermediate pipes.
Refitting
6. Reverse instructions 1 to 5 ensuring gas proof joints
at all pipe connections.
30.10.09
30.10.12
Triumph TR6 Manual. Part No. 545277 Issue I
•
k ZJ