FUEL METERING DISTRIBUTOR OUTLET UNION
AND ADAPTOR SEALS
FUEL SYSTEM - PI
- Remove and refit
19.35.14
Special tools to make in the workshop.
A - Hook for removing sleeve sealing rings.
B - Sleeve alignment tool.
C - Tool for fitting sealing rings to the sleeve.
Removing
I.
Isolate the battery.
2.
Remove the metering distributor 19.35.07.
3.
Remove the injector pipes from the metering
distributor. .
4.
Hold the metering distributor in a vice and remove
numbers one, six, three and four outlet unions
complete with '0' rings and sealing washers.
NOTE: The seals for numbers two and five outlets are
removed when their respective injector pipes are
removed.
5.
Using special tool A, remove the six adaptor seals
from the outlet ports.
Continued
Triumph TR6 Manual. Pan No. 545277 Issue I
NT2 248
19.35.14 P.I. Sheet 1