Triumph TR6 PI Operation Manual page 363

BRAKES
REAR HOSE
or
Unscrew the hose from the 3-way connector.
Refitting
5. Fit the hose to the chassis bracket and secure with
lockwasher and nut.
Connect the brake pipe from the 3-way connector
70.15.17/18
Removing
1. Jack up the car and remove the rear wheel.
2. Disconnect the brake pipe union and brake pipe from
the wheel cylinder to the flexible hose.
3. Remove the nut and lockwasher securing the flexible
hose to the trailing arm.
4. Disconnect the pipe union, from the front end of the
flexible hose. Remove the nut and lockwasher
securing the hose to the chassis bracket and withdraw
the hose.
- Remove and refit
or
Fit the hose to the 3-way connector.
6. Fit the hose to the trailing arm bracket and secure
with lockwasher and nut. Ensure that the hose is
neither kinked nor twisted on installation.
7. Connect the wheel cylinder pipe to the hose.
8. Fit the rear wheel and remove the jack.
9. Bleed the brakes.
2·WAY CONNECTOR
- Remove and refit
70.15.32
Removing
I. Disconnect the brake pipe unions from the
connector.
2. Release the connector from the pipes.
Refitting
3. Reverse instructions I and 2.
4. Bleed the brakes.
Triumrh TR6 l\1<mu.11. p .. trt No. 545:!71 Issue I
70.15.17/18
70.15.32