Triumph TR6 PI Operation Manual page 374

BRAKES
SERVO
- Remove and refit
70.50.01
Removing
I. Disconnect the vacuum hose from the non-return
valve.
2. Disconnect the two brake pipes from the master
cylinder.
3. Remove the two nuts and spring washers securing the
master cylinder to the servo and withdraw the master
cylinder.
4. Remove the clevis pin securing the servo push rod to
the brake pedal.
5. Remove me four nuts and spring washers securing the
servo to the pedal bracket. And withdraw the servo.
Refitting
6. Reverse instructions I to 5.
7. Bleed the brakes.
5. Reverse instructions I to 4.
Refitting
Removing
I. Remove the brake stop switch.
2. Remove the split pin, plain washer and clevis pin
securing the servo push rod to the brake pedal.
3. Remove the rubber boot from the push rod.
4. Withdraw the fIlter.
70.50.25 - Remove and refit
SERVO FILTER
NT2607
70.50.01
70.50.25
Triumpti. TR6 Manuai. Part No. 545277 Issue I