Table of Contents
Advertisement
INSTRUMENTS
6.
Reverse instructions 1 to S.
Refitting
I.
Isolate the battery.
2.
Unscrew the knurled retainer securing the cable to the
tachometer.
3.
Unscrew the two knurled nuts securing the clamp legs
and earth lead.
4.
Withdraw the tachometer.
5.
Pull out the four bulb holders.
88.30.21
- Remove and refit
TACHOMETER
Removing
TACHOMETER CABLE - COMPLETE
- Remove and refit
88.30.23
Removing
1.
Unscrew the knurled retainer securing the cable to
the distributor"
2.
Unscrew the knurled retainer securing the cable to
the tachometer.
3.
Pull the cable through the grommet aperture and
detach it from the vehicle.
Refitting
4.
Reverse instructions l'to 3. Seal the grommet to the
bulkhead with Seelastik SRSI.
TACHOMETER CABLE - INNER
- Remove and refit
88.30.24
Removing
1.
Unscrew the knurled retainer securing the cable to
the tachometer.
2.
Using long-nosed pliers, withdraw the inner cable.
Take care not to contaminate the upholstery or
fittings with grease.
Refitting
3.
Sparingly grease the inner cable. Do not use oil.
4.
Feed the inner cable into the outer cable, rotating it
slightly to assist operation.
5.
Withdraw the inner cable about 8 ins (200 mm) and
wipe off surplus grease. Re· insert the inner cable,
rotating it slightly to assist engagement of the squared
end to the drive gear.
6.
Engage the inner cable to the tachometer.
7.
Refit the
~nurled
retainer.
88.30.21
88.30.24
Triumph TR6 Manual. Part No. 545277 Issue I
~
~
Hide quick links:
Advertisement
Table of Contents
