Table of Contents
Advertisement
STEERING
STEERING COLUMN UNIVERSAL
JOINT/COUPLING - UPPER
- Remove and refit
57.40.26
Removing
1.
Removing the lock wires securing the flexible
coupling securing bolts.
2.
Remove the securing bolts (4).
3.
Withdraw the flexible coupling and bonding strap.
Refitting
4.
i:everse instructions 1 to 3. Ensure that the bonding
strap is refitted.
STEERING COLUMN UNIVERSAL
JOINT/COUPLING -lOWER
- Remove and refit
57.40.27
Removing
1.
Remove the interme-diate shaft 57.40.22.
2.
Remove the pichbolt securing the universal joint to
the rack pinion shaft and withdraw the universal
joint.
Refitting
3.
Align the flat on the lower end of the intermediate
shaft with the pinchbolt locat!on in the yoke of the
universal joint and fit the shaft to the universal joint.
4.
With the road wheels and steering wheel in the
'straight ahead' positions, offer up the universal joint
and intermediate shaft to the pinion shaft and check
the upper flange of the intermediate shaft for
alignment with the flexible coupling. Adjust as
necessary on pinion shaft splines.
5.
Fit the pinchbolt and nut to the pinion shaft and
universal joint and tighten.
.
6.
Fit the bolts and locking wire to the flexible coupling
ensuring that the bonding strap is secured.
7.
Fit
and
tighten
the
pinchbolt. Securing 'the
intermediate shaft to the upper yoke of the universal
joint.
57.40.26
57.40.27
Triumph TR6 Manual. Part No. 545277 Issue 1
NT2522
Hide quick links:
Advertisement
Table of Contents
