Triumph TR6 PI Operation Manual page 343

FRONT SUSPENSION
FRONT HUB
- Overhaul
60.25.07
Dismantling
I. Remove the front hub 60.25.01/02.
2. Withdraw the outer bearing.
3. Withdraw the inner oil seal, inner bearing shield and
inner bearing.
4. Extract the inner and outer bearing tracks.
5. Thoroughly clean
all
components.
Reassembling
6. Examine
all
components and renew as necessary.
7. Fit the bearing inner and outer tracks to the hub.
8. Insert the inner bearing.
9. Fit the inner bearing shield Oip of shield outward).
10. Partially fill the hub with clean grease.
11. Lubricate the new felt seal and install the seal in the
inner side of the hub.
12. Insert the outer bearing.
13. Fit the hub to the car 60.25.01/02.
60.25.07
4
I
NT2671
Triumph TR6 Manual. Part No. 545277 Issue I
f1i!\j
lXJ