Triumph TR6 PI Operation Manual page 512

ELECTRICAL
SWITCHES
- Luggage boot lamp switch - remove and refit 86.65.22
Removing
I. Open the luggage boot lid
2. Remove the floor carpet.
3. Remove the spare wheel cover panel.
4. Remove two screws securing the luggage boot lamp.
5. Withdraw/the lamp assembly from the petrol tank
trim panel.
6. Disconnect two Lucar connectors.
7. Remove eight screws and withdraw the petrol tank
trim panel.
8. Locate the switch adjacent to the right hand hinge.
9. Remove two screws.
10. Withdraw the switch.
11. Pull the wire through the bracket hole and disconnect
the terminal end.
Refitting
12. Reverse instructions I to II. Connect the lamp
assembly Lucar connectors either way round.
SWITCHES
5. Reverse instructions I to 4.
Refitting
Removing
I. Open the cubby box lid.
2. Remove the rubber buffer from the switch plunger.
3. Ease the switch outwards to release the spring claws
from the bracket.
4. Pull the wire through the bracket hole and disconnect
the terminal end.
NTO 716
86.65.24
- Cubby box illumination switch
- remove and refit
I~I
Triumph TR6 Manual. Part No. 545277 Issue I
86.65.22
86.65.24