Triumph TR6 PI Operation Manual page 215

MANIFOLD AND EXHAUST SYSTEM
Refitting
4. Reverse instructions 1 to 3, ensuring gas proof joints
at the pipe connections.
Removing
1. Remove the nut, bolt and clamp plate securing the
tail pipes to the flexible mounting.
2. Slacken the two clips securing the silencer assembly
to the rear intermediate pipes and mounting bracket.
3. Remove the silencer assembly.
30.10.14
'ILENCER ASSEMBLY
- Remove and refit
INTERMEDIATE PIPES - REAR
- Remove and refit - L.H. 30.10.24
Refitting
5. Reverse instructions I to 4, ensuring gas proof joints
at allpipe connections.
1. Slacken the two clips securing the silencer assembly
to the rear intermediate pipes and mounting bracket.
2. Slacken the two clips securing lhe front intermediate
pipes to the rear intermediate pipes.
3. Disengage the silencer assembly from the rear
intermediate pipes.
4. Remove the rear intermediate pipes.
-R.H.
Removing
30.10.25
Refitting
4. Fit new flange packing.
5. Reverse instructions I and 2, ensuring that the stud
nuts are tightened to 20 to 25 Ibf ft (2·8 to 3·5 kgf
m).
Removing
I. Remove the nut and bolt securing the front
intermediate pipes to the support bracket.
2. Remove the four nuts and lock washers securing the
front pipes to the manifold.
3. Pull down the pipes and remove the flange packing.
/OWN PIPE FLANGE PACKING
- Remove and refit
30.10.26
Triumph TR6 Manual. Part No. 545277 Issue I
30.10.14
30.10.26