Table of Contents
Advertisement
INSTRUMENTS
SPEEDOMETER
Refitting
8.
Reverse instructions 1 to 7.
Removing
1.
Isolate the battery.
2.
Unscrew the knurled nut securing the cable to the
speedometer.
3.
Unscrew the trip reset knurled nut.
4.
Unscrew the two knurled nuts securing the clamp legs
and earth lead.
5.
Withdraw the speedometer.
6.
Pull out the four bulb holders.
7.
Disconnect the two Lucar connectors from the voltage
stabiliser.
- Remove and refit
88.30.01
SPEEDOMETER CABLE - COMPLETE
Removing
1.
Unscrew the knurled nut securing the cable to the
speedometer.
2.
Working from below the vehicle, unscrew the knurled
nut securing the cable to the gearbox extension.
3.
To assist refitting, carefully note the cable position
relative to other components.
4.
Detach the cable from the clip securing it to the
body.
5.
Manoeuvre
the
cable downwards through
the
grommet aperture and detach it from the vehicle.
(Non overdrive models)
- Remove and refit
88.30.06
Refitting
6.
Reverse instructions 1 to 5. Seal the grommet to the
bulkhead with Seelastik SR51.
88.30.01
88.30.06 Sheet 1
Triumph TR6 Manual. Pan No. 545277 Issue
I
Hide quick links:
Advertisement
Table of Contents
