Triumph TR6 PI Operation Manual page 219

MANIFOLD AND EXHAUST SYSTEM
Refitting
II. Fit the linkage to the manifold.
12.
Fit and loosely secure the manifold with the three
nuts, spring washers and two clamps.
13.
Manoeuvre the manifold until the two butterfly levers
are equidistant between the two fork levers and
finally tighten the manifold nuts.
14. Reverse instructions 2 to 6.
15. Adjust the throttle butterflies. 19.20.05
MANIFOLD GASKET
8
,,:
10.11
Refitting
4. Renew the gasket and fit with the metal side towards
the manifold.
5. Reverse instructions I and 2, ensuring that all stud
nuts are tightened to
20
to
25
lbf ft
(2'8
to
3'5
kgf
m).
- Remove and refit
Removing
I.
Remove the induction manifold
30.15.02.
2. Remove the exhaust manifold
30.15.0 I.
3. Remove the gasket.
30.15.15
Triumph TR6 Manual. P,ut Nll. ~452n Issue :2