Triumph TR6 PI Operation Manual page 177

FUEL SYSTEM - PI
6. Remove two nuts complete with spring washers
securing the 'T' piece and pressure relief valve
assembly to the body and remove the assembly from
the car.
7. Disconnect the strainer housing complete with the
pressure relief from the 'T' piece.
8. Remove the pressure relief valve from the strainer
housing.
Refitting
9. Assemble the pressure relief valve to the strainer
housing using a new washer and tightening to 30 - 40
Ibfft (4'1 to 5'5 kgfm).
10. Reconnect the strainer housing and pressure relief
valve to the 'T' piece using a new washer and tighten
to 30 to 40 Ibf ft (4'1 to 5'5 kgf m).
II. Reverse instructions I to 6.
19.65.07 P.I. Sheet 2
NT2238
Triumph TR6 Manual. Part No. 545277 Issue I