Table of Contents
Advertisement
OVERDRIVE
'A'
TYPE
Accumulator
30.
Remove accumulator spring, shim washers and tube.
31.
Insert tool Ll82 into bore of accumulator sleeve,
turn lower lever to lock in position, withdraw
accumulator by turning and pulling upper lever.
32.
Separate sleeve and piston.
Non-return valve
33.
Remove hexagon plug a, copper washer b and valve
components - spring c, plunger d and ball e.
Pump
34.
Remove sump plug, sealing washer and magnetic
washers.
35.
Remove filter.
36.
Remove hexagon plug and two screws.
37.
Fit tool Ll83A I to pump and withdraw pump body
a, spring b and piston c.
Inspection
38.
Clean all components.
39.
Inspect all gears, bearings, bushes, working surfaces
and oilways for evidence of undue wear and blockage
in accordance with good engineering practice. Renew
as necessary.
40.
Renew all '0' rings, oil seals and gaskets. Lubricate all
'0'
rings with petroleum jelly prior to fitting.
Continued
4O.20.l0A Sheet 3
Triumph TR6 Manual. Part No. 545277 Issue I
Hide quick links:
Advertisement
Table of Contents
