Triumph TR6 PI Operation Manual page 30

(3) Check/top up brake fluid reservoir
I. Check fluid level against mark on side of reservoir.
If topping up is necessary:-
2. Wipe clean the reservoir cap and
sur~ounding
area.
3. Remove the reservoir cap.
4. Add fluid to bring level above danger mark on side of
reservoir.
WARNING: Use only new fluid of the correct specification.
Do NOT use fluid of unknown origin,
or fluid that has been exposed to the atmosphere,
or fluid that has been discharged during bleeding
operations.
5. Replace reservoir cap.
6. Remove any spilled fluid with a clean cloth.
CAUTION: Paintwork can be damaged by direct contact
with brake fluid.
(4) Check/top up clutch fluid reservoir
I. Wipe clean the reservoir cap and surrounding area.
2. Remove the reservoir cap.
3. Check fluid level against mark on side of reservoir.
4. If necessary, add fluid to bring level up to mark on
side of reservoir.
WARNING: Use only new fluid of the correct specification.
Do NOT use fluid of unknown origin,
or fluid that has been exposed to the atmosphere,
or fluid that has been discharged during bleeding
operations.
5. Replace reservoir cap.
6. Remove any spilled fluid with a clean >:loth.
CAUTION: Paintwork can be damaged by direct contact
with clutch fluid.
Triumph TRh Manu;'11. P<ln
!",. 545~77 h~u~ J
.'
2
/
MAINTENANCE
MT 26990
10.00(JS