Table of Contents
Advertisement
FUEL SYSTEM - TC
Refitting
8.
Fit new bushes to the bulkhead if necessary.
9.
Reverse instructions I to 6.
Removing
I.
Clamp the inlet hose to the filter.
2.
Disconnect the filter from the main line pipe.
3.
Disconnect the filter from the inlet pipe
to
the pump
and remove the filter.'
..
NT2 '733
19.20.02
NTO 407
- Remove and refit
FUEL MAIN FILTER
2.
\Vithin the engine compartment, disconject the
horizontal control rod from the countershaft lever.
3.
Release the countershaft lever return spring.
4.
Mark
for
reassembly the
relationship
of the
countershaft to the lever.
5.
Remove the countershaft lever clamp bolt and nut
and remove the lever from the shaft together with the
double spring and plain washer.
6.
From inside the car, remove the throttle pedal and
countershaft.
·7.
If necessary, remove the bushes in the bulkhead.
**NOTE: On later engines "Corbin" wire clips are fitted to
secure the fuel pipe connections. New clips should be
fitted when reassembling
th~
fuel line.**
Refitting
4.
Fit a new filter ensuring that the side of the filter
marked 'in' faces the direction of flow.
5,
Remove the clamp from the inlet pipe.
Triumph TR6 Manual. Part No. 545277 Issue
** 19.20.01 Sheet 2··
19.20.02C
Hide quick links:
Advertisement
Table of Contents
