Triumph TR6 PI Operation Manual page 234

GEAR CHANGE LEVER
SYNCHROMESH GEARBOX
- Check and adjust
1.
2.
3.
4.
5.
**
6.
7.
8.
9.
37.16.01
Remove the gearlever knob and locknut.
Remove the fascia support bracket.
Slacken the locknuts.
Place the lever in the Ist/2nd gate.
Tighten the right hand adjuster until it just moves the
gearlever. Back off the adjuster a half turn and
tighten the locknut.
Place the lever in the reverse gate.
**
Tighten the left hand adjuster until
it
just moves the
gearlever. Back off the adjuster a half turn and
tighten the locknut.
Refit the fascia support bracket.
Refit the gearlever knob and locknut.
5
~
Refitting
9. Using heavy grease to retain the plunger and spring,
refit the gearchange lever.
10. Refit the spring, plate and cap.
II. Refit the bolt.
12. Adjust the gearchange lever 37.16.0 I.
13. Refit the grommet.
14. Refit the fascia support bracket.
IS. Refit the gearlever knob and locknut.
Removing
I. Slacken the locknut and unscrew the gearlever knob.
2. Remove the fascia support bracket 76.46.09.
3. Remove the gearlever grommet.
4. Position the gearlever in neutral.
5. Take out the bolt.
6. Slacken the locknuts.
7. Depress and turn the geadever cap, withdraw the cap,
plate and spring.
8. Carefully withdraw the gearchange lever ensuring that
the plunger and spring do not fall out.
GEARCHANGE LEVER
- Remove and refit
37.16.04
~
~
Triumph TR6 Manual. Part No. 545277 Issue 2
37.16.01
37.16.04