Triumph TR6 PI Operation Manual page 169

FUEL SYSTEM - PI
FUEL TANK - P.I.
- Remove and refit
Removing
19.55.01
I. Isolate the battery.
2. Remove the luggage compartment forward trim panel
76.13.17.
3. Drain the fuel tank 19.55.02.
4. Disconnect the pipe-tank to filter inlet 19.40.09.
5. Disconnect the pipe-PRY return to the fueltank
19.40.13.
6. Disconnect the metering distributor lubrication fuel
return to the tank, pipe 19.40.08.
7. Remove the fuel filler to tank hose 19.40.19.
8. Disconnect the tank gauge unit leads.
9. Remove the six bolts complete with plain and spring
washers securing the fuel tank to the body.
10.
Remove the fuel tank.
Refitting
II. Reverse instructions 3 to 10 inclusive.
12. Reconnect the battery, start the engine and examine
for fuel leaks.
13. Refit the luggage compartment forward trim panel
76.13.17.
WARNING: Extinguish all naked lights before commencing
this operation.
I.
Remove the spare wheel cover and spare wheel.
2. Place a suitable clean receptacle under the fuel tank
gravity outlet point.
3. Disconnect the hose from the mter inlet and allow
the fuel to drain.
4. Reconnect the hose to the filter inlet when the tank
is empty.
5. Refit the spare wheel and cover.
CAUTION: If the fuel is to be returned to the tank ensure
absolute cleanliness whilst draining and during
storage, otherwise foreign matter and fluids may
cause serious damage to the P.I. fuel system.
FUEL TANK - P.I.
- Drain
19.55.02
19.55.01 PJ.
19.55.02 P.I.
Triumph TR6 Manual. Pan
No.
545277 Issue 1