Triumph TR6 PI Operation Manual page 232

Reassembling
17. Fit a sealing ring into each bore.
18. Fit the cover plate and secure with two setscrews.
19. Fit the interlock plunger into the 3rd/top selector,
shaft.
20. Fit the 3rd/top selector shaft, distance tube and fork
into the top cover. Push the shaft into the- neutral
position.
21 Locate an interlock ball in-between the 3rd/top and
reverse shaftbores and retain with grease.
22. Fit the reverse selector shaft, distance tube and
actuator into the top cover. Push the shaft into the
neutral position.
23. Locate an interlock ball in between the 3rd/top and
I st/2nd bores and retain with grease.
24. Fit the 1st/2nd selector shaft, distance tube and fork
into the top cover.
25. Secure the forks and actuator to the shafts using new
"wedglok" bolts.
SYNCHROMESH GEARBOX
~
~
23 19 21 ------
NT28:ua
~
1XJ
Triumph TR6 Manual. Part No.
S4S277
Issue I 37.12.19
Sheet
2