Triumph TR6 PI Operation Manual page 405

Refitting
5. Reverse instructions I to 4.
Removing
1. Remove the two bolts and washers securing the roof
to the header rail.
2. Remove the two bolts and washers securing the side
bracket to the tie bar.
3. Remove the two bolts and washers securing the rear
end to the rear deck.
4. Lift off the hardtop.
Refitting
6. Reverse instructions I to 5.
Removing
1. Release the catch levers.
2. Disconnect the six fasteners.
3. Remove the five bolts and washers securing the angle
bracket to the rear deck.
4. Remove the six screws securing the mounting
brackets to the body.
5. Lift off the hood assembly.
Removing
I. Pull the ashtray bowl out of the mounting bracket.
2. Straighten the mounting bracket legs and pull the
bracket clear
Refitting
3. Place the bracket
In
the ashtray aperture.
4. Bend the mounting bracket legs to secure it to the
fascia.
5. Press the ashtray bowl into the mounting bracket.
HARDTOP
- Remove and refit
HOOD ASSEMBLY
- Remove and refit
ASHTRAY
- Remove and refit
76.61.01
76.61.08
76.67.13
BODY
"' .
,n
Triumph TR6 Manual. Pact No. 545277 Issue 1
76.61.01
76.67.13