Triumph TR6 PI Operation Manual page 213

EXHAUST SYSTEM 30.00.00
MANIFOLD AND EXHAUST SYSTEM
**
On earlier carburetter engined cars the exhaust system differs from that shown in this Section in that it has a single exhaust
pipe up to the silencer at the rear.
**
EXHAUST SYSTEM COMPLETE
- Remove and refit 30.10.01
Removing
1. Slacken the two clips securing the front intermediate
pipes to the rear intermediate pipes.
2. Remove the nut, bolt and clamp plate securing the
tail pipes to the flexible mounting.
3. Remove the two nuts and washers from the clips
securing the silencer assembly to the rear
intermediate pipes and mounting bracket.
4. Remove the silencer assembly and rear intermediate
pipes.
5. Remove the four nuts and lockwashers securing the
front pipes to the manifold.
6. Remove the nut, bolt and lock washer securing the
front intermediate pipes to the mounting bracket.
7. Remove the front pipes and front intermediate pipes.
Refitting
8. Fit new flange packing.
9. Reverse instructions 1 to 7, ensuring gas proof joints
at all pipe connections.
Triumph TR6 Manual. Part No; 545277 Issue 2
30.00.00
30.10.01