Triumph TR6 PI Operation Manual page 200

Dismantling
1. Remove the fuel pump from the engine 19.45.08.
2. Remove the cover retaining bolt and washer and lift
off the cover and sealing washer.
3. Remove the filter gauze.
4. Mark the relationship of the upper and lower body
for re-assembly and remove the six screws and
separate the two assemblies.
5. Remove the diaphragm and spring turning it through
90
0
and lifting it out of engagement with the link
lever.
6. Remove the circlip securing the rocker arm pin.
7. Drive out the pin and remove the rocker and link
lever.
FUEL PUMP
- Overhaul
FUEL SYSTEM - TC
19.45.15
a.
Cover retaining bolt
b. Cover
c. Cover washer
d. Filter gauze
e.
Upper body
f. Inlet valve
g. Outlet valve
h. Diaphram
i.
Diaphram spring
Tn
j. Lower body
NT0409
k. Rocker return spring
1.
Diaphram actuating lever.
m. Rocker
n. Rocker fulcrum pin
p.
Gasket
Continued
~-""
IZl
Triumph TR6 Manual. Pan No. S4S271 Issue 1
19.45.I5C Sheet I