Triumph TR6 PI Operation Manual page 46

(58) Check security of road wheel fastenings.
Disc Wheels
For each wheel in turn:-
I. Check tightness of road wheel securing nuts, which if
correct should be tightened to 60 to 80 lbf
ft
(8'3 to
11'1 kgfm).
Wire Wheels
For each wheel in turn
1. Visually check that adaptor is fitted on the correct
side.
2. Remove road wheel- See 74.20.01.
3. Check tightness of the adaptor securing nuts, which if
correct should be tightened to 55 to 65 lbf ft (7'6 to
9"0 kgfm).
4. Replace road wheel - See 74.20.01 ensuring that the
centre nut is correctly secured.
(59) Check that tyres are in accordance with manufacturers
specification
For each road wheel and spare wheel:-
1. Check that tyres are in accordance with vehicle
manufacturers recommendations for type and size
anq report any deviation.
2. Check for mixing of cross ply and radial ply tyres and
report if both types are present on the vehicle
(including spare wheel).
WARNING: It
is
illegal in the U.K. and highly dangerous to
mix cross ply and radial ply tyres on the same axle or
to fit radial ply tyres to the front wheels only.
Triumph TR6 Manual. Part No. 545177 Jssue I
3,-----ffl~)
MAINTENANCE
10.00.21