Triumph TR6 PI Operation Manual page 322

Removing
I. Disconnect the plug-in connectors for lights, horn,
flashers, ignition and starter circuits.
2. Remove the steering wheel 57.60.01.
3. Remove the speedometer (LH Steer) or the tachometer
(RH Steer). See 88.30.01 or 88.30.21 as appropriate.
4. Remove the pinchbolt securing the lower steering
column to the flexible coupling.
5. Remove the two setscrews securing the steering
column safety clamp and withdraw the clamp.
6. Remove the two bolts and nuts securing the forward
end of the anti-torque strap to the scuttle.
7. Remove the domed protection covers from the
steering column bracket bolts.
8. Remove the two bolts, nuts and washers securing the
steering column bracket halves. Withdraw the harness
cover.
9. Withdraw the anti-torque strap and the upper half of
the column bracket.
10. Rotate the steering column to bring the shearbolts of
the steering lock/ignition switch to an accessible
position.
11. With a centre-punch mark the centre of the two
shearbolts heads securing the steering lock/ignition
bracket.
S~~
COLUMN ASSEMBLY
- Remove and refit 57.40.01
STEERING
12. Using a small chisel, uns4few the shearbolts. If this
proves unsuccessful dr:ilf-
~he
shearbolts and unscrew
them using an 'Easiou(type extractor.
13. Remove the steering lock/ignition switch.
14. Withdraw the steering column.
Continued
NT2465
Triumph TR6 Manual. Part No. 545277 Issue I
Sheet 1 57.40.01